|
|
2250/51/55 - 4250/51/55
Raised Panel Pan Door
Technical Data
- Door sections are formed from heavy, 25-gauge galvanized
draw quality steel
- Section joints are roll-formed into a tongue-and-groove
design which produces a superior weather seal
- Inside stiles are made of galvanized steel and stile holes
are "dimpled" for increased holding power
- Bottom weather seal utilizes an aluminum retainer and
extruded virgin vinyl
- Extension or torsion springs are individually
computer-calibrated to lift your door
- Extra-heavy paint system consists of .25 mil. primer with
rust inhibitor and a .75 mil. coating of baked-on polyester
paint in your choice of white, almond, sandstone, or brown
- Hinges are stamped from galvanized steel in a "wide body"
pattern for greater stability and longer life
- Models 2251/4251 include 1-3/8" polystyrene insulation
with a vinyl back cover
- Models 2255/4255 include 9/16" polystyrene insulation with
a vinyl back cover
- Models 2251/4251 R-value - 6.85
- Models 2255/4255 R-value - 3.29
DOOR INSULATION
Each model utilizes a 25 gauge exterior steel skin.
Chosen for their weather resistant features, models
2251/4251 utilize a 1-3/8" thick polystyrene insulation,
while models 2255/4255 employs a 9/16" thick polystyrene
insulation with vinyl back covers.
2251/4251 R-value - 6.85
2255/4255 R-value - 3.29
|
